GPFC19 Priority Flow Control
| Operation | Provides pressure compensated flow to the priority port. Once the priority flow is satisfied all excess flow is available to a secondary circuit, or to tank, through the bypass port. Constant priority flow is maintained regardless of changes in load, inlet pressure or flow. Warning: If priority flow is blocked, the valve will close bypass flow. |
| Type | Bypass/Restrictive, Fixed Orifice. |
| Material | Precision ground & honed, hardened steel parts. Buna-N seals standard. Zinc plated. |
| Pressure | Valve rated to 5,000 psi maximum. 3,000 psi maximum in aluminum block. |
| Inlet Flow | Maximum flow is 120 gpm. |
| Priority Flow | Up to 50 gpm. (Factory setting is +/-10% of customer specified flow) |
| Fluid | General hydraulic fluid |
| Cavity | G-19A [See Detail] |
|
ORDERING INFORMATION [For Prices Click Here] |
|||||
|
GPFC19 |
-I | -N | -XX |
-8P |
A |
|
Basic cartridge |
Adjustment Type I - Internal Hex (Adjustment is +/-25% of factory setting)
|
Seals N - Buna-N V - Viton
|
Priority Flow Setting XX - Flow in gpm (Customer specified) Factory Setting: +/-10%
|
Port Size 8P - 1 npt T16 - sae #16 T20 - sae #20 omit - no block
|
Material A - Aluminum omit - no block |
|
Logic Hydraulic Controls, Wilmington, North Carolina |
|
Phone: (910) 791-9293 Fax: (910) 392-5621 E-mail: 1info@logichyd.com |