GPFC11       Priority Flow Control

Operation	Provides pressure compensated flow to the priority port. Once the priority flow is satisfied all excess flow is available to a secondary circuit, or to tank, through the bypass port. Constant priority flow is maintained regardless of changes in load, inlet pressure or flow. Warning: If priority flow is blocked, the valve will close bypass flow.
Type	Bypass/Restrictive, Fixed Orifice.
Material	Precision ground & honed, hardened steel parts.  Buna-N seals standard.  Zinc plated.
Pressure	Valve rated to 5,000 psi maximum. 3,000 psi maximum in aluminum block.
Inlet Flow	Maximum flow is 15 gpm.
Priority Flow	Up to 6 gpm. (Factory setting is +/-10% of customer specified flow)
Fluid	General hydraulic fluid
Cavity	G-11A        [See Detail]

ORDERING INFORMATION      [For Prices Click Here]
GPFC11	-F	-N	-XX	-3P	A
Basic cartridge	Adjustment Type F – Fixed I - Internal Hex (Adjustment is +/-25% of factory setting)	Seals N - Buna-N V - Viton	Priority Flow Setting  XX - Flow in gpm     (Customer specified)    Factory Setting: +/-10%	Port Size 3P – 3/8 npt 4P – 1/2 npt T6 - sae #6 T8 – sae #8 omit - no block	Material A – Aluminum omit - no block

Logic Hydraulic Controls, Wilmington, North Carolina    

Phone: (910) 791-9293      Fax: (910) 392-5621     E-mail: 1info@logichyd.com