407 SERIES EXCESS FLOW PROTECTORS

Material	All steel construction. Black oxide finish.
Closing Flow	Preset by factory to customer specified value (tolerance: +20%/-0%). Standard flow after valve closes is approximately 1.5 gpm at a pressure drop of 1500 psi. Contact the factory for special bleed flow requirements.
Pressure	3,000 psi maximum
Pressure Differential	50 to 100 psi
Fluid	General hydraulic fluid
Seals	Buna-n
Operating Temp.	-40 degrees F to +200 degrees F

DIMENSIONS [For Prices Click Here]
Model No.	Inlet	Outlet	Flow Range	"A" (Hex)	"B"
407-T8-XX	1/2 SAE	1/2 SAE ORFS	.5 - 8 GPM	7/8"	1.75"
407-T10/T8-XX	5/8 SAE	1/2 SAE ORFS	1 - 20 GPM	1"	2.20"
407-T10-XX	5/8 SAE	5/8 SAE ORFS	1 - 20 GPM	1 1/4"	2.44"
407-T12/T10-XX	3/4 SAE	5/8 SAE ORFS	2 - 35 GPM	1 1/4"	2.00"
407-T14/T10-XX	7/8 SAE	5/8 SAE ORFS	2 - 45 GPM	1 3/8"	2.50"
407-T16/T12-XX	1 SAE	3/4 SAE ORFS	5 - 60 GPM	1 1/2"	3.06"

("XX" in the model no. is the closing flow specified by the customer in gallons per minute.)