405 Series       Female SAE x Male JIC 37 Degree Flare Excess Flow Protectors 

                                                                                                                                                                                                          

Material All steel construction. Black oxide finish.
Closing Flow  Preset by factory to customer specified value (tolerance: +20%/-0%). Standard flow after valve closes is approximately 1.5 gpm at a pressure drop of 1500 psi. Contact the factory for special bleed flow requirements. 
Pressure 3,000 psi maximum
Pressure Differential 50 to 100 psi
Fluid General hydraulic fluid
Seals Buna-n
Operating Temp. -40 degrees F to +200 degrees F

 

DIMENSIONS      [For Prices Click Here]
Model No. Inlet Outlet Flow Range  "A" (Hex) "B"
405-T4-XX 1/4 SAE 1/4 JIC .5 - 4 GPM 3/4" 2.62"
405-T6-XX 3/8 SAE 3/8 JIC .5 - 8 GPM 7/8" 3.00"
405-T8-XX 1/2 SAE 1/2 JIC 1 - 20 GPM 1" 3.25"
405-T10-XX 5/8 SAE 5/8 JIC 2 - 35 GPM 1 1/4" 4.00"

 

("XX" in the model no. is the closing flow specified by the customer in gallons per minute.) 

 

Logic Hydraulic Controls, Wilmington, North Carolina    

Phone: (910) 791-9293      Fax: (910) 392-5621     E-mail: 1info@logichyd.com