403 Series       Male SAE x Male JIC 37 Degree Flare Excess Flow Protectors 

                                                                                                                                                                                                      

Material All steel construction. Black oxide finish.
Closing Flow  Preset by factory to customer specified value (tolerance: +20%/-0%). Standard flow after valve closes is approximately 1.5 gpm at a pressure drop of 1500 psi. Contact the factory for special bleed flow requirements. 
Pressure 3,000 psi maximum
Pressure Differential 50 to 100 psi
Fluid General hydraulic fluid
Seals Not applicable
Operating Temp. -40 degrees F to +200 degrees F

 

DIMENSIONS      [For Prices Click Here]
Model No. Inlet Outlet Flow Range  "A" (Hex) "B"
403-T6-XX 3/8 SAE 3/8 JIC .5 - 4 GPM 3/4" 1.65"
403-T8-XX 1/2 SAE 1/2 JIC .5 - 8 GPM 7/8" 1.75"
403-T10-XX 5/8 SAE 5/8 JIC 1 - 20 GPM 1" 2.06"
403-T12-XX 3/4 SAE 3/4 JIC 2 - 35 GPM 1 1/4" 2.00"

 

("XX" in the model no. is the closing flow specified by the customer in gallons per minute.) 

 

Logic Hydraulic Controls, Wilmington, North Carolina    

Phone: (910) 791-9293      Fax: (910) 392-5621     E-mail: 1info@logichyd.com