250 Series Slip In Cartridge Pressure Compensated Dampened Flow Controls
| Material | Aluminum body with steel internal parts. |
| Closing Flow | Preset by factory to customer specified value (tolerance: +/-15%) |
| Pressure | 3,000 psi maximum |
| Pressure Differential | 50 to 100 psi |
| Fluid | General hydraulic fluid |
| Seals | Not applicable |
| Operating Temp. | Not applicable |
| DIMENSIONS [For Prices Click Here] | ||||
| Model No. | Flow Range | Suggested Bore Dia. | "A" (Dia.) | "B" |
| 250-795-XX | .5 - 15 GPM | .797"/.802" | .795" | 2.03" |
| 250-970-XX | 1 - 30 GPM | .972"/.977" | .970" | 2.78" |
| 250-109-XX | 1 - 30 GPM | 1.097"/1.102" | 1.095" | 3.00" |
| 250-122-XX | 3 - 45 GPM | 1.222"/1.227" | 1.220" | 3.19" |
("XX" in the model no. is the controlled flow specified by the customer in gallons per minute.)
|
Logic Hydraulic Controls, Wilmington, North Carolina |
|
Phone: (910) 791-9293 Fax: (910) 392-5621 E-mail: 1info@logichyd.com |